LOGO1.gif (3192 bytes)

Products
Transformers   Cabinets  Attack signal rail

Magyar

ROBOT-AA.gif (20917 bytes)
APP.gif (984 bytes)
POINT.gif (171 bytes) Supply units for alarm and fire alarm systems
POINT.gif (171 bytes) Supplementary supply units
POINT.gif (171 bytes) Light current electronic equipment

ETR Transformers

 ETR
 Types: ETR-35N, ETR-35T, ETR-35U, ETR-50U, ETR-35NP, ETR-35UP
FEATURE.gif (961 bytes)
POINT.gif (171 bytes) Double insulated safety transformers (cast metal)
POINT.gif (171 bytes) "Built-in" primary fuse
POINT.gif (171 bytes) Delay out-lead ( can be soldered or with soluble slide contact)
POINT.gif (171 bytes) Multy line contact (ETR-35NP and UP)
POINT.gif (171 bytes) Upright  plastic cabinet
POINT.gif (171 bytes) Attaches with screws
TECH.gif (1009 bytes)
POINT.gif (171 bytes) Weight: 1.12 Kg 1.66 Kg (ETR-50U)
POINT.gif (171 bytes) Size: 90x59x75 mm 95x59x79 (NP&50U)
120x75x78 ((ETR-50U)
POINT.gif (171 bytes) Primary Voltage 230V AC
POINT.gif (171 bytes) Current consumption on primary side in standby mode:
in active mode:		 58 mA
200 mA
POINT.gif (171 bytes) Secondary voltage:
nominal:
in standby:
12 V 14 V 16 V 24 V
13.2 V 15.4 V 17.5 V 26.9 V
POINT.gif (171 bytes) Nominal secondary          current: 2.9 A 2.5 A 2.2 A 1.5 A
ETR-50U 4.2 A 3.6 A 3.2 A
POINT.gif (171 bytes) Power: 35 VA 50VA
POINT.gif (171 bytes) Primary fuse: T250 mA

wire.gif (14676 bytes)

Cabinets

 CAB1.gif (15238 bytes)CAB2.gif (6247 bytes)
 Types: CRD-1,CRD-2, CRD-3, CRD-3S, CRK
FEATURE.gif (961 bytes)
POINT.gif (171 bytes) Reinforced sheet metal
POINT.gif (171 bytes) Hinged lid
POINT.gif (171 bytes) Lid can be attached with screws
POINT.gif (171 bytes) Space for "lid lock" on lid
POINT.gif (171 bytes) Space for "tamper safe switch",  signals upon opening lid
POINT.gif (171 bytes) "Cable lead" opening on side wall
POINT.gif (171 bytes) "Cable lead" opening and screw holes on back
POINT.gif (171 bytes) CRK lock with key
POINT.gif (171 bytes) "Tamper safe switch" on CRD-3S
TECH.gif (1009 bytes)
POINT.gif (171 bytes) Material thickness: 11mm
POINT.gif (171 bytes)
Size:
CRD-1 280x360x130 mm  (for 26Ah battery)
CRD-2 260x310x80 mm  (for 17 Ah battery)
CRD-3 180x200x70 mm  (for 7,2 Ah battery
CRK 180x205x40 mm (operating units, code switches)
ROBO-BB2.gif (20797 bytes)
APP.gif (984 bytes)
POINT.gif (171 bytes) For batteries and power       supply units
POINT.gif (171 bytes) For electronic circuit

wire.gif (14676 bytes)

ROBOT-AA.gif (20917 bytes)

Attack signal rail

 Attack signal rail
 Types: PRC-1, PRC-2
FEATURE.gif (961 bytes)
POINT.gif (171 bytes) Tamper safe switch
POINT.gif (171 bytes) PRC-1 sign output, microswitch NO-NC, max load:24 V / 1 A
POINT.gif (171 bytes) PRC-2  sign output,   sign sensor NO-NC, max load:24 V / 1 A
POINT.gif (171 bytes) Monostabil or Bistabil (with memory) adjustable mode setting
POINT.gif (171 bytes) LED memory readout
POINT.gif (171 bytes) Memory clearing with "-" impulse
POINT.gif (171 bytes) Within 4 seconds,  with double push, it signals for 10 seconds or until cleared
TECH.gif (1009 bytes)
POINT.gif (171 bytes) Weight: 0,6 Kg
POINT.gif (171 bytes) Size: 440x31x31 mm
POINT.gif (171 bytes) Voltage of supply unit: 6-14 V DC
POINT.gif (171 bytes) Current consumption on primary side in standby mode:
in active mode:		 58 mA
200 mA
APP
POINT.gif (171 bytes) For alarm systems as part of a "whole" protection system
POINT.gif (171 bytes) As a foot switch

Point.gif (3502 bytes)Back to Main Index (or navigate via the below links)

Transformers  | Cabinets | Attack signal rail | Sirens | Activeinfra sensors | 
| Wheel shackle | Temperature controller | Remote switch trough telephone connection | Patrol controller |
| Voice panel | Fastening boxes | Automatic telephone dialer | Answer panel |

LOGO-1.gif (2811 bytes)
Kereskedelmi és Szolgáltató Bt.
Uj Palotai út, 14.
Budapest, Hungary  1138
Tel/Fax: (36-1) 329-9369
Send us E-mail with your questions!
info[kukac]codesecurity.com